Westinghouse WH1000i — Start the Generator

Operation

For the Westinghouse WH1000i, from the Westinghouse operator's manual.

Applies to: Westinghouse WH1000i

Procedure

1. Check fuel level indicator
2. Set Run/Stop/Start switch to desired position
3. Pull start handle (manual models) or activate electric start
4. Ensure oil fill cap is accessible
5. Adjust choke as needed

Full service-parts list: Westinghouse WH1000i →

Source: Westinghouse operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Westinghouse repair guides →