Westinghouse WGen9500 — Checking Engine Oil
Maintenance
For the Westinghouse WGen9500, from the Westinghouse owner's manual.
Applies to: Westinghouse WGen9500
Before you start
- Removing dipstick while engine is hot can cause hot oil to spray out and burn skin
Procedure
- Operate/maintain generator on a flat surface; stop engine if running
- Let engine cool several minutes to equalize crankcase pressure
- Clean around oil fill plug/dipstick with damp rag
- Remove oil fill plug/dipstick
- Thread dipstick fully back in, then remove and read oil level
- Acceptable level is on the crosshatches between H and L lines
Full service-parts list: Westinghouse WGen9500 →
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.