Westinghouse WGen9500 — Changing Engine Oil
Maintenance
For the Westinghouse WGen9500, from the Westinghouse owner's manual.
Applies to: Westinghouse WGen9500
Before you start
- Never dispose of used oil into sewer, ground, or waterways
Procedure
- Operate/maintain generator on a flat surface and stop the engine
- Let engine cool several minutes to equalize crankcase pressure
- Place oil pan under oil drain plug
- Clean around oil drain plug with damp rag
- Remove oil drain plug and set aside on clean surface
- Allow oil to completely drain
- Replace oil drain plug
- Fill crankcase with oil per Adding Engine Oil procedure
Tools required
- oil pan Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- SAE 10W30 Amazon eBay $54.99, 1.10 L
Full service-parts list: Westinghouse WGen9500 →
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.