Westinghouse WGen9500 — Battery Replacement
Repair & overhaul
For the Westinghouse WGen9500, from the Westinghouse owner's manual.
Applies to: Westinghouse WGen9500
Before you start
- Dispose of used battery per local/state guidelines
Parts for this job
- 191010 Battery eBay
Part numbers from the service-parts list for Westinghouse WGen9500. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove spark plug wire from spark plug
- Loosen and remove bolt on battery hold-down plate; swing plate out
- Tip battery forward slightly to access cables
- Disconnect black negative cable first
- Disconnect red positive cable second and remove battery
- Install new battery matching spec table
- Connect red positive cable first
- Connect black negative cable second
- Install battery hold-down plate with removed nuts
- Install spark plug wire onto spark plug
Specs & values
- Battery: 12V, 14Ah, YTX14-BS, part 191010 eBay
Full service-parts list: Westinghouse WGen9500 →
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.