Westinghouse — Add Engine Oil
Maintenance
From a Westinghouse owner's manual covering: iGen1200, iGen2000, iGen2500, iPro2500. Check it applies to your exact model before use.
Applies to: Westinghouse iGen1200
Before you start
- Do not overfill.
Procedure
- Loosen the screws and remove the engine service panel to access the oil/fill drain plug.
- Remove oil fill plug/dipstick.
- Using the supplied 4-cycle engine oil and funnel, slowly add engine oil to the engine until full.
- Do not overfill; if oil level is too high, oil will drain out through the fill plug.
Tools required
- Funnel (included) Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 4-stroke FridayParts $11.50/cycle engine oil
Full service-parts list: Westinghouse iGen1200 →
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.