Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Westinghouse›Changing Engine Oil - 10KPRO

Westinghouse 10KPRO / 8KPRO — Changing Engine Oil - 10KPRO

Maintenance

For the Westinghouse 10KPRO / 8KPRO, from the Westinghouse owner's manual.

Applies to: Westinghouse 10KPRO

Parts for this job

Part numbers from the service-parts list for Westinghouse 10KPRO. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Stop engine and let cool
  2. Place oil pan under drain plug and oil filter
  3. Clean around oil drain plug and oil filter
  4. Remove oil filter (counterclockwise)
  5. Remove oil drain plug
  6. Allow oil to completely drain
  7. Replace oil drain plug
  8. Apply light film of oil to filter gasket
  9. Install oil filter hand-tight plus additional half turn
  10. Fill crankcase with oil
  11. Dispose of used oil properly

Full service-parts list: Westinghouse 10KPRO →

Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Westinghouse repair guides →