Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Wacker Neuson›Refueling the Machine (Deep Sea Controller)

Wacker Neuson G 25 — Refueling the Machine (Deep Sea Controller)

Operation · Fuel tank

For the Wacker Neuson G 25, from the Wacker Neuson owner's manual.

Applies to: Wacker Neuson G 25

Before you start

  • Fire hazard. Keep ignition sources away while refueling.

Procedure

  1. Remove the fuel cap.
  2. Place genset controller power switch ON and wait for boot up.
  3. Press right arrow to the Engine screen.
  4. Navigate to the Engine Fuel Level screen.
  5. Fill the fuel tank until the fuel level reaches 100%.
  6. Re-install the fuel cap.
  7. Place genset controller power switch OFF.

Specs & values

  • Fill to 100%

Source: Wacker Neuson owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Wacker Neuson repair guides →