Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Wacker Neuson›Refueling the Machine (Basler Controller)

Wacker Neuson G 25 — Refueling the Machine (Basler Controller)

Operation · Fuel tank

For the Wacker Neuson G 25, from the Wacker Neuson owner's manual.

Applies to: Wacker Neuson G 25

Before you start

  • Fire hazard. Keep ignition sources away while refueling.
  • Do not overfill the fuel tank.

Procedure

  1. Remove the fuel cap.
  2. Place engine start switch in REMOTE START position.
  3. Read fuel level on LCD screen.
  4. Fill the fuel tank until the fuel level reaches 100%.
  5. Re-install the fuel cap.
  6. Place engine start switch in OFF position.

Specs & values

  • Fill to 100%

Source: Wacker Neuson owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Wacker Neuson repair guides →