Wacker Neuson G 25 — Checking and Draining the Containment System
Maintenance
For the Wacker Neuson G 25, from the Wacker Neuson owner's manual.
Applies to: Wacker Neuson G 25
Procedure
- Open the access door on the side of the machine.
- Check the fluid level in the containment system.
- If fluid has accumulated, drain the containment system.
- Place a plastic cloth and collection container beneath the machine.
- Remove the drain plug and drain fluid.
- Apply pipe sealant to the drain plug and re-install.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Check and drain every 50 hours
Source: Wacker Neuson owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.