Volvo Penta — Upper bearing housing, disassembly
Repair & overhaul
From a Volvo Penta service manual — check it applies to your exact model before use.
Browse Volvo Penta generators & specs →
Procedure
- Put the bearing housing in tool 884723 and press the gear wheel out with tool 884733 and shaft 9991801; save shims.
- Remove the circlip using circlip pliers.
- Put the bearing housing in tool 884723 and press the roller bearing out with tool 884728 and shaft 9991801.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Volvo Penta service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.