Volvo Penta — Starting with auxiliary batteries
Operation · Electrical system
From a Volvo Penta operator's manual covering: EDC 4, TAD722GE, TD520GE, TD720GE. Check it applies to your exact model before use.
Applies to: Volvo Penta TAD722GE, Volvo Penta TD520GE, Volvo Penta TD720GE
Before you start
- Do not move connections when attempting to start (risk of arcing)
- Ordinary cables to standard batteries must not be loosened on any condition
Procedure
- Check auxiliary batteries connected so rated voltage corresponds to engine system voltage
- Connect red (+) jumper cable to auxiliary battery, then to flat battery
- Connect black (-) jumper cable to auxiliary battery, then to a place some distance from flat batteries
- Start the engine
- Remove jumper cables in reverse order from installation
Tools required
- Jumper cables Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Volvo Penta operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.