Volvo Penta — Replacing fuel filters
Maintenance · Fuel filters (spin-on)
From a Volvo Penta service manual — check it applies to your exact model before use.
Browse Volvo Penta generators & specs →
Procedure
- Wash the filter cover thoroughly.
- Unscrew and discard the old fuel filters.
- Check that the new filters are absolutely clean and the gaskets in good condition.
- Screw on the new filters by hand until the gaskets make contact with the cover.
- Tighten the filters a further 1/2 turn by hand.
- Air-vent the fuel system, pump up feed pressure and check for leakage.
Tools required
- 999 9179-6 (tool for removing filter) Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Volvo Penta service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.