Volvo Penta — Instructions for running the starter motor
Operation
From a Volvo Penta service manual — check it applies to your exact model before use.
Browse Volvo Penta generators & specs →
Before you start
- Make sure engine cannot start when turned over with starter motor.
Procedure
- Ensure ignition switch is in 'O' position.
- Connect a switch between ground and starter relay.
- Do not run starter motor longer than 15 seconds at a time.
- Allow batteries and starter motor to rest for 1 minute before retry.
- Disconnect and remove switch when finished.
Tools required
- switch Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 15 seconds max run time
- 1 minute rest
Source: Volvo Penta service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.