Volvo Penta Group 23 EDC III — Checking the regulator
Testing & diagnosis · Generator regulator
For the Volvo Penta Group 23 EDC III, from the Volvo Penta service manual.
Browse Volvo Penta generators & specs →
Procedure
- Measure with a multimeter set for diode measurement.
- Connect the probes between the carbon brushes.
- Switch the probes.
- Check that there is no short-circuit.
Tools required
- Multimeter (diode measurement) Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Volvo Penta service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.