Volvo Penta — Fuel filter, replacement
Maintenance
From a Volvo Penta service manual — check it applies to your exact model before use.
Browse Volvo Penta generators & specs →
Procedure
- Wash the filter cover well and unscrew the old filters using tool 9179.
- Make sure the new filters are absolutely clean and gaskets undamaged.
- Install new filters by hand until the gasket mates with the cover.
- Tighten the filter an additional 1/2 turn.
- Bleed the fuel system, pump up feed pressure and check tightness.
Tools required
- 9179 Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Tighten an additional 1/2 turn after gasket contact
Source: Volvo Penta service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.