Volvo Penta — Drive belts. Inspection/adjustment
Adjustments · Engine, general
From a Volvo Penta operator's manual covering: EDC 4, TAD722GE, TD520GE, TD720GE. Check it applies to your exact model before use.
Applies to: Volvo Penta TAD722GE, Volvo Penta TD520GE, Volvo Penta TD720GE
Before you start
- TD420VE, TAD420VE and TAD620VE fan belts have automatic tensioner and need no adjustment
Procedure
- Inspect and adjust after operation when belts are hot
- Loosen the screws (A) before tensioning the alternator belts
- Adjust so belts can be pressed down about 10 mm between pulleys
- Change worn belts which operate in pairs together
- Check condition of drive belts, change as necessary
Specs & values
- Belt deflection about 10 mm (3/16 in)
Source: Volvo Penta operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.