Volvo Penta — Copper sleeves for injectors, cleaning
Maintenance · Injector copper sleeve
From a Volvo Penta service manual — check it applies to your exact model before use.
Browse Volvo Penta generators & specs →
Procedure
- Push the assembly sleeve down over the brush head before mounting the brush in a drilling machine.
- Fit the assembly sleeve over the copper sleeve.
- Push the brush down into the sleeve, attach a drilling machine and clean the sleeve.
- After brushing, use compressed air to blow out any residue.
Tools required
- 9812546 cleaning brush Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Volvo Penta service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.