Perkins — Stopping the Engine
Operation
From a Perkins operator's manual covering: 1106C-70TA, 1106D-70TA, SEBU8731. Check it applies to your exact model before use.
Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA
Before you start
- Stopping the engine immediately after working under load can result in overheating and accelerated wear
Procedure
- Remove the load from the engine; reduce speed to low idle; allow engine to idle for 5 minutes to cool.
- Stop the engine according to the shutoff system; turn the ignition keyswitch to the OFF position.
- Allow at least 2 minutes after shutdown before turning the battery disconnect switch to OFF.
Specs & values
- Idle 5 minutes before stopping
- Wait at least 2 minutes before battery disconnect
Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →
Source: Perkins operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.