Home›Repair guides›Perkins›Engine Air Cleaner Element (Single Element) - Inspect/Replace

Perkins — Engine Air Cleaner Element (Single Element) - Inspect/Replace

Maintenance

From a Perkins operator's manual covering: 1106C-70TA, 1106D-70TA, SEBU8731. Check it applies to your exact model before use.

Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA

Before you start

  • Never run the engine without an air cleaner element installed
  • Never service the air cleaner element with the engine running

Parts for this job

Part numbers from the service-parts lists for Perkins 1106C-70TA, Perkins 1106D-70TA. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove air cleaner cover (1) and remove air filter element (2).
  2. Cover air inlet (3) with tape or clean cloth.
  3. Clean the inside of air cleaner cover (1) and the body holding the element.
  4. Inspect the replacement element for damage, dirt and debris.
  5. Remove the seal from the opening of the air inlet.
  6. Install a clean, undamaged air filter element (2).
  7. Install air cleaner cover (1).
  8. Reset the air cleaner service indicator.

Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →

Source: Perkins operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →