Perkins 1106C-70TA / 1106D-70TA — Welding on Engines with Electronic Controls
Repair & overhaul · Electrical System
For the Perkins 1106C-70TA / 1106D-70TA, from the Perkins operator's manual.
Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA
Before you start
- Proper welding procedures are necessary to avoid damage to electrical switches and associated components.
Procedure
- Stop the engine. Turn the switched power to the OFF position.
- Disconnect the negative battery cable. If a battery disconnect switch is provided, open the switch.
- Disconnect the electrical connections for any switches or electronic governors installed.
- Connect the welding ground cable directly to the part that will be welded, as close as possible to the weld.
- Protect the wiring harness from welding debris and spatter.
- Use standard welding practices to weld the materials.
Tools required
- Welding equipment Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Maximum distance between the welded component and any electrical/electronic component
Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →
Source: Perkins operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.