Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Perkins›Starting the Engine

Perkins 1106C-70TA / 1106D-70TA — Starting the Engine

Operation

For the Perkins 1106C-70TA / 1106D-70TA, from the Perkins operator's manual.

Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA

Before you start

  • Do not use aerosol types of starting aids such as ether.

Procedure

  1. If equipped, move throttle lever to full throttle position.
  2. Turn engine start switch to START position, hold and crank engine.
  3. When engine starts, release the engine start switch.
  4. If equipped, slowly move throttle lever to low idle and allow engine to idle.
  5. If engine does not start, release switch, allow starting motor to cool, repeat.
  6. Turn engine start switch to OFF position in order to stop engine.

Specs & values

  • Do not crank more than 30 seconds; allow starting motor to cool two minutes

Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →

Source: Perkins operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →