Home›Repair guides›Perkins›Fuel Tank Water and Sediment - Drain

Perkins 1106C-70TA / 1106D-70TA — Fuel Tank Water and Sediment - Drain

Maintenance

For the Perkins 1106C-70TA / 1106D-70TA, from the Perkins owner's manual.

Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA

Before you start

  • Dispose of all fluids according to local regulations and mandates.

Procedure

  1. Open drain valve on bottom of fuel tank to drain water and sediment.
  2. Close drain valve.
  3. Check fuel daily. Allow five minutes after fuel tank has been filled before draining water and sediment.
  4. Fill fuel tank after operating engine to drive out moist air. Do not fill tank to top.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →

Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →