Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Perkins›Engine Oil Level - Check

Perkins 1106C-70TA / 1106D-70TA — Engine Oil Level - Check

Maintenance · Lubrication system

For the Perkins 1106C-70TA / 1106D-70TA, from the Perkins owner's manual.

Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA

Before you start

  • Hot oil and hot components can cause personal injury.

Procedure

  1. Perform maintenance with engine stopped.
  2. Ensure engine is level or in normal operating position for true level indication.
  3. After engine switched OFF, wait 10 minutes to allow oil to drain to oil pan. Check oil level.
  4. Maintain oil level between 'ADD' and 'FULL' marks on dipstick, or between H and L marks. Do not overfill crankcase.
  5. Remove oil filler cap and add oil if necessary. Clean and install oil filler cap.

Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →

Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →