Perkins 1106C-70TA / 1106D-70TA — Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Maintenance
For the Perkins 1106C-70TA / 1106D-70TA, from the Perkins owner's manual.
Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA
Before you start
- Never run engine without an air cleaner element installed.
- Never service air cleaner element with engine running.
Parts for this job
- WA11994 Air filter — Perkins 1106D-70TA Amazon eBay $114.47
Part numbers from the service-parts lists for Perkins 1106C-70TA, Perkins 1106D-70TA. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove cover. Remove primary air cleaner element.
- Secondary air cleaner element should be removed and discarded every three cleanings of primary.
- Cover air inlet with tape to keep out dirt.
- Clean inside of air cleaner cover and body with clean, dry cloth.
- Remove tape from air inlet. Install secondary air cleaner element. Install new or cleaned primary element.
- Install air cleaner cover.
- Reset air cleaner service indicator.
- Clean primary element with pressurized air (max 207 kPa) or vacuum cleaning. Do not tap or strike. Do not wash.
- Inspect primary element with 60 W blue light for tears/holes. Discard damaged elements.
Tools required
- 60 W blue light Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Maximum air pressure 207 kPa (30 psi)
Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.