Perkins 1106C-70TA / 1106D-70TA — Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Maintenance
For the Perkins 1106C-70TA / 1106D-70TA, from the Perkins owner's manual.
Applies to: Perkins 1106C-70TA, Perkins 1106D-70TA
Before you start
- Cooling system coolant additive contains alkali. Avoid contact with skin and eyes.
Procedure
- Use a Coolant Conditioner Test Kit to check concentration of SCA.
- Slowly loosen cooling system filler cap to relieve pressure. Remove cap.
- If necessary, drain some coolant to allow space for extra SCA.
- Add correct amount of SCA.
- Clean filler cap and inspect gasket. Replace if damaged. Pressure test filler cap. Install cap.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Do not exceed recommended six percent supplemental coolant additive concentration.
Full service-parts list: Perkins 1106C-70TA →, Perkins 1106D-70TA →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.