Northern Lights — SP-2 Oil Changes
Maintenance · Engine
From a Northern Lights owner's manual covering: 844DW3, 844LW3, M20CRW3, M844DW3, M844LW3, M844W3. Check it applies to your exact model before use.
Applies to: Northern Lights M20CRW3, Northern Lights M844DW3, Northern Lights M844LW3, Northern Lights M844W3, Northern Lights 844 (844L for LW models) engine, Northern Lights 844L engine
Before you start
- Never put additives or flushing oil in crankcase.
Procedure
- The set is delivered with special break-in oil; change engine oil and filter after 50 hours.
- Use diesel-rated break-in oil (John Deere pre-packaged or equivalent) during the first 100 hours.
- Change oil and filter again at 100 hours using recommended oil; thereafter every 250 hours.
- Loosen the clamp on the oil change tube; remove cap; drain oil; replace cap and tube.
- Refill engine with recommended oil for the season.
Specs & values
- Engine capacity with new oil filter (844DW3 and 844LW3): 2.1 gallons (8.2 liters)
Full service-parts list: Northern Lights M20CRW3 →, Northern Lights M844DW3 →, Northern Lights M844LW3 →, Northern Lights M844W3 →
Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.