Home›Repair guides›Northern Lights›Oil Changes (SP2)

Northern Lights NL673 — Oil Changes (SP2)

Maintenance · Engine crankcase

For the Northern Lights NL673, from the Northern Lights owner's manual.

Applies to: Northern Lights NL673

Before you start

  • Never put additives or flushing oil in crankcase.

Parts for this job

Part numbers from the service-parts list for Northern Lights NL673. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Change engine oil and oil filter after 50 hours; use Service CC 30 weight oil for the first 100 hours.
  2. Change oil and filter again at 100 hours, then every 250 hours.
  3. During intermittent cold weather, change oil every 100 hours or six weeks.
  4. Change oil when engine is warm.
  5. Loosen the clamp on the oil change tube, remove cap, drain oil, replace cap and tube.
  6. Refill engine with recommended oil; capacity with new oil filter is 3.1 liters.
  7. Never use a flushing oil.

Specs & values

  • Engine capacity with new oil filter: 3.3 quarts (3.1 liters)

Full service-parts list: Northern Lights NL673 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →