Home›Repair guides›Northern Lights›Cooling System Flushing (SP14)

Northern Lights NL673 — Cooling System Flushing (SP14)

Maintenance

For the Northern Lights NL673, from the Northern Lights owner's manual.

Applies to: Northern Lights NL673

Before you start

  • Allow the engine to cool before working on the cooling system; open the filler cap carefully using protective clothing.

Procedure

  1. Flush the cooling system every 2500 hours or every 12 months, whichever comes first.
  2. Remove radiator cap and open drain cocks on radiator and engine block.
  3. Pour clean water into radiator until water coming from radiator is clear of discoloration.
  4. Close the radiator drain and continue flushing until water from the engine drain is clear.
  5. Open all drain cocks and drain completely.
  6. Close drain cock and refill with 50% water / 50% ethylene glycol antifreeze mixture.
  7. Check hoses and connections and repair any leakage.

Specs & values

  • Flush every 2500 hours or every 12 months

Full service-parts list: Northern Lights NL673 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →