Northern Lights NL382W — Operating
Operation · Generator set
For the Northern Lights NL382W, from the Northern Lights operator's manual.
Applies to: Northern Lights NL382W
Before you start
- If gauges deviate from normal, shut down and investigate.
Procedure
- Check gauges often.
- Oil pressure must be above 15 PSI.
- D.C. voltmeter should read 11 to 15 volts at 80°F (25°C).
- Water temperature must be below 200°F (94°C).
- Let unit run unloaded for three to five minutes.
- Add electrical load.
Specs & values
- Oil pressure above 15 PSI
- D.C. voltmeter 11 to 15 volts at 80°F (25°C)
- Water temperature below 200°F (94°C)
Full service-parts list: Northern Lights NL382W →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.