Northern Lights NL382W — Injector Installation
Repair & overhaul · Fuel injectors
For the Northern Lights NL382W, from the Northern Lights operator's manual.
Applies to: Northern Lights NL382W
Before you start
- Do not use hand to check for fuel leaks.
Procedure
- Place new sleeve in injector hole.
- Slide injector into hole; replace hold-down bracket and nuts.
- Tighten nuts evenly to 18-20 ft-lbs (2.5-2.9 kgf-m).
- Install fuel lines, return lines and clamps, and delivery lines; leave loose at injectors for bleeding.
- Pump hand lever to fill lines; tighten lines at injectors.
- Start engine and check for leaks with paper or cardboard, not hand.
Tools required
- wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Injector hold-down nuts: 18 - 20 ft-lbs (2.5 - 2.9 kgf-m)
Full service-parts list: Northern Lights NL382W →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.