Northern Lights NL382W — Changing Engine Oil
Maintenance · Engine lubrication system
For the Northern Lights NL382W, from the Northern Lights operator's manual.
Applies to: Northern Lights NL382W
Before you start
- Never use flushing oil.
Procedure
- Change engine oil and filter after first 50 hours.
- Use Service CC 30 weight oil during first 100 hours.
- Change oil and filter again at 100 hours, then every 250 hours.
- During intermittent cold weather, change every 100 hours or six weeks, whichever comes first.
- Change oil when warm but not hot.
- Loosen oil pan plug and drain oil into basin.
- Refill with recommended oil; capacity with new filter is 5.5 liters (5.81 quarts).
Tools required
- basin Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Oil capacity with new filter: 5.81 quarts (5.5 liters)
Full service-parts list: Northern Lights NL382W →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.