Home›Repair guides›Northern Lights›SP2. Oil Changes

Northern Lights M864 — SP2. Oil Changes

Maintenance · Engine

For the Northern Lights M864, from the Northern Lights owner's manual.

Applies to: Northern Lights M864

Before you start

  • Never use a flushing oil.
  • Dispose of waste oil in an approved manner.

Parts for this job

Part numbers from the service-parts list for Northern Lights M864. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Change engine oil and oil filter after 50 hours; use Service CC 30 weight during first 100 hours.
  2. Change oil and filter again at 100 hours; thereafter every 200 hours.
  3. In intermittent cold weather, change oil every 100 hours or six weeks, whichever comes first.
  4. Change oil at any seasonal temperature change requiring a new viscosity.
  5. Change oil when engine is warm but not hot.
  6. Remove cap, drain oil, replace cap and tube.
  7. Refill engine with recommended oil.

Specs & values

  • Model 864K capacity with new oil filter: 7.8 qts. (7.4 liters)

Full service-parts list: Northern Lights M864 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →