Northern Lights M864 / OM864W — Stopping

Operation · Generator set

For the Northern Lights M864 / OM864W, from the Northern Lights operator's manual.

Applies to: Northern Lights M864

Procedure

1. Remove electrical load from the generator set.
2. Run the engine for a three to five minute cool-down period.
3. Move the Engine Control switch to the STOP position until the engine stops completely.
4. Shut off seacock, fuel valve, and battery switch.

Full service-parts list: Northern Lights M864 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →