Northern Lights M864 / OM864W — Oil Changes

Maintenance · Engine lubrication system

For the Northern Lights M864 / OM864W, from the Northern Lights operator's manual.

Applies to: Northern Lights M864

Before you start

  • Never use a flushing oil or additives in the crankcase.
  • Dispose of waste oil in an approved manner.

Parts for this job

Part numbers from the service-parts list for Northern Lights M864. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. The set is delivered with special break-in oil; change engine oil and oil filter after 50 hours.
  2. Use Service CC 30 weight oil during the first 100 hours.
  3. Change oil and filter again at 100 hours, then every 200 hours.
  4. In cold weather operation change oil every 100 hours or six weeks, whichever comes first.
  5. Change oil when engine is warm but not hot. Remove cap and drain oil; replace cap and tube.
  6. Refill with recommended oil; capacity with new oil filter is 7.8 qts. (7.4 liters) for Model 864W.

Specs & values

  • Crankcase capacity with new oil filter: 7.8 qts. (7.4 liters)

Full service-parts list: Northern Lights M864 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →