Northern Lights M673 / OM673 — Stopping

Operation · Generator set

For the Northern Lights M673 / OM673, from the Northern Lights operator's manual.

Applies to: Northern Lights M673, Northern Lights OM673

Procedure

1. Remove electrical load from generator set.
2. Run engine 3 to 5 minutes for cool down.
3. Move Engine Control switch to STOP momentarily.
4. Marine sets: shut off seacock, fuel valve, and battery switch.

Full service-parts list: Northern Lights M673 →, Northern Lights OM673 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →