Northern Lights M673 / OM673 — Oil change

Maintenance · Engine

For the Northern Lights M673 / OM673, from the Northern Lights operator's manual.

Applies to: Northern Lights M673, Northern Lights OM673

Before you start

  • Never use flushing oil

Parts for this job

Part numbers from the service-parts lists for Northern Lights M673, Northern Lights OM673. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Run engine until warm; stop engine.
  2. Loosen clamp on oil change tube, remove cap, drain oil.
  3. Replace cap and tube.
  4. Refill with recommended oil.
  5. Check oil level after 3 minutes; add if needed.

Specs & values

  • Capacity with new oil filter: 3.2 quarts (3.0 liters)

Full service-parts list: Northern Lights M673 →, Northern Lights OM673 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →