Northern Lights M673 / OM673 — Changing lube oil filter
Maintenance · Engine
For the Northern Lights M673 / OM673, from the Northern Lights operator's manual.
Applies to: Northern Lights M673, Northern Lights OM673
Before you start
- Hand tight only; overtightening damages housing
Parts for this job
- 24-02001 Oil filter — Northern Lights M673 Amazon eBay $23.45 NAPA $9.09
- 24-02001 Oil filter — Northern Lights OM673 Amazon eBay $23.45 NAPA $9.09
Part numbers from the service-parts lists for Northern Lights M673, Northern Lights OM673. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove old filter with filter wrench; discard.
- Remove old gasket; clean mount face.
- Apply thin film of engine oil to new gasket.
- Screw filter on until gasket meets sealing surface.
- Tighten one-half turn by hand; do not overtighten.
- Start engine, check leaks, stop, wait 3 minutes, check oil.
Tools required
- filter wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- M673M oil filter #24-02001 Amazon eBay $23.45 NAPA $9.09
- M673L FridayParts $48.00 oil filter #24-08001 Amazon eBay $27.44 NAPA $9.09
Full service-parts list: Northern Lights M673 →, Northern Lights OM673 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.