Northern Lights M38CR2 / M944 — Stopping

Operation · Generator set

For the Northern Lights M38CR2 / M944, from the Northern Lights operator's manual.

Applies to: Northern Lights M38CR2, Northern Lights M944

Procedure

1. Remove electrical load from generator set.
2. Run engine two to three minutes for cool-down.
3. Move Engine Control switch to STOP position.

Full service-parts list: Northern Lights M38CR2 →, Northern Lights M944 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →