Northern Lights M38CR2 / M944 — Change Raw Water Pump Impeller

Maintenance

For the Northern Lights M38CR2 / M944, from the Northern Lights operator's manual.

Applies to: Northern Lights M38CR2, Northern Lights M944

Procedure

1. Remove pump cover.
2. Pry out impeller using needle-nose pliers or two screwdrivers; remove all pieces.
3. Clean inside of housing.
4. Press in new impeller and place sealing plug in outer end of impeller center.
5. Reinstall cover with new gasket and check for leaks.

Full service-parts list: Northern Lights M38CR2 →, Northern Lights M944 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →