Northern Lights — Changing the Engine Oil

Maintenance · Engine crankcase

From a Northern Lights owner's manual covering: NL445D, NL445D1, NL445T1, NL445T2, NL668T2. Check it applies to your exact model before use.

Applies to: Northern Lights NL445D1, Northern Lights NL445T1, Northern Lights NL445T2, Northern Lights NL668T2, John Deere 4045D150 / 4045T150 / 4045T250 / 6068T250 engine

Procedure

1. Change oil when the engine is warm.
2. Remove the plug from the outlet in the base frame and screw in an owner-supplied drain hose.
3. Open the valve at the oil pan outlet and drain oil into a suitable container.
4. Close the valve, remove the drain hose and replace the plug.
5. Refill the engine with the recommended oil and dispose of waste oil in an approved manner.

Full service-parts list: Northern Lights NL445D1 →, Northern Lights NL445T1 →, Northern Lights NL445T2 →, Northern Lights NL668T2 →, John Deere 4045D150 / 4045T150 / 4045T250 / 6068T250 engine →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →