Northern Lights — Changing Lube Oil Filter (SP-3)

Maintenance

From a Northern Lights owner's manual covering: 844DW3, 844LW3, M20CRW3, M844DW3, M844LW3, M844W3. Check it applies to your exact model before use.

Applies to: Northern Lights M20CRW3, Northern Lights M844DW3, Northern Lights M844LW3, Northern Lights M844W3, Northern Lights 844L engine

Procedure

1. Change the lube oil filter with every oil change.
2. Use a filter wrench to remove old filter and dispose of it properly.
3. Remove and discard the old gasket; clean mounting surface.
4. Spread a thin film of engine oil on the new filter gasket and screw it on.
5. Using hands only, tighten filter one-half turn farther.
6. Start engine and check for leakage; stop, wait 3 minutes and check oil level.

Full service-parts list: Northern Lights M20CRW3 →, Northern Lights M844DW3 →, Northern Lights M844LW3 →, Northern Lights M844W3 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →