MQ Power DCA-220SSV / DCA-220SSVU — Wheel Lug Nut Tightening Sequence
Adjustments · Trailer wheels
For the MQ Power DCA-220SSV / DCA-220SSVU, from the MQ Power operator's manual.
Applies to: MQ Power DCA-220SSV, MQ Power DCA-220SSVU, Volvo Penta TAD520GE engine, Volvo Penta TAD741GE engine
Before you start
- NEVER use a pneumatic air gun to tighten wheel lug nuts.
Procedure
- Start all wheel lug nuts by hand.
- Torque all lug nuts in sequence; do not torque all the way down.
- Tighten each lug nut in 3 separate passes as defined by Table 18.
- After first road use, retorque all lug nuts in sequence.
- Check all wheel lug nuts periodically.
Tools required
- Torque wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- See tire torque requirements table
Full service-parts list: MQ Power DCA-220SSV →, MQ Power DCA-220SSVU →
Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.