Home›Repair guides›MQ Power›Replacing Oil Filter

MQ Power DCA-220SSV / DCA-220SSVU — Replacing Oil Filter

Maintenance · Engine lubrication

For the MQ Power DCA-220SSV / DCA-220SSVU, from the MQ Power operator's manual.

Applies to: MQ Power DCA-220SSV, MQ Power DCA-220SSVU, Volvo Penta TAD520GE engine, Volvo Penta TAD741GE engine

Parts for this job

Part numbers from the service-parts lists for MQ Power DCA-220SSV, MQ Power DCA-220SSVU. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove the old oil filter.
  2. Apply a film of oil to the gasket on the new oil filter.
  3. Install the new oil filter.
  4. Run the engine for a while and check for leaks.
  5. Add more oil if needed and clean excessive oil from engine.

Full service-parts list: MQ Power DCA-220SSV →, MQ Power DCA-220SSVU →

Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MQ Power repair guides →