Home›Repair guides›MQ Power›Refueling Procedure

MQ Power DCA-220SSV / DCA-220SSVU — Refueling Procedure

Operation · Fuel tank

For the MQ Power DCA-220SSV / DCA-220SSVU, from the MQ Power operator's manual.

Applies to: MQ Power DCA-220SSV, MQ Power DCA-220SSVU, Volvo Penta TAD520GE engine, Volvo Penta TAD741GE engine

Before you start

  • Fuel spillage on a hot engine can cause fire or explosion.
  • Diesel fuel and vapors are dangerous to health; avoid skin contact and inhaling fumes.

Procedure

  1. Place trailer on firm level ground so fuel cells are level.
  2. Open cabinet doors on right side of generator.
  3. Remove fuel cap and fill tank with clean fresh #2 diesel fuel.
  4. Read the fuel gauge when filling; do not wait for fuel to rise in filler neck.
  5. Never overfill; leave room for fuel expansion.
  6. Close fuel cap tightly and wipe up spilled fuel immediately.

Specs & values

  • Use ONLY #2 diesel fuel

Full service-parts list: MQ Power DCA-220SSV →, MQ Power DCA-220SSVU →

Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MQ Power repair guides →