MQ Power DCA-220SSV / DCA-220SSVU — Flushing Out Radiator and Replacing Coolant
Maintenance · Cooling system
For the MQ Power DCA-220SSV / DCA-220SSVU, from the MQ Power operator's manual.
Applies to: MQ Power DCA-220SSV, MQ Power DCA-220SSVU, Volvo Penta TAD520GE engine, Volvo Penta TAD741GE engine
Before you start
- Allow engine to cool when flushing radiator; hot coolant can cause severe burns.
- DO NOT remove radiator cap until unit has completely cooled.
Procedure
- Open both cocks at crankcase side and lower radiator and drain coolant.
- Open radiator cap while draining.
- Remove the overflow tank and drain it.
- Check hoses for softening and kinks; check clamps for leakage.
- Flush radiator with clean tap water until rust and dirt are removed.
- Do not clean radiator core with objects such as a screwdriver.
- Tighten both cocks and replace the overflow tank.
- Replace with coolant recommended by engine manufacturer and close cap tightly.
Specs & values
- Antifreeze mixing ratio must be less than 50%
Full service-parts list: MQ Power DCA-220SSV →, MQ Power DCA-220SSVU →
Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.