MQ Power DCA-220SSV / DCA-220SSVU — Fan Belt Inspection and Tension
Maintenance
For the MQ Power DCA-220SSV / DCA-220SSVU, from the MQ Power operator's manual.
Applies to: MQ Power DCA-220SSV, MQ Power DCA-220SSVU, Volvo Penta TAD520GE engine, Volvo Penta TAD741GE engine
Before you start
- Never place hands near the belts or fan while the generator set is running.
Parts for this job
Part numbers from the service-parts lists for MQ Power DCA-220SSV, MQ Power DCA-220SSVU. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Inspect the fan belt for damage and wear.
- Adjust belt in accordance with the VOLVO Engine Owner's Manual.
- Belt tension is proper if it bends 10 to 15 mm when depressed with the thumb.
Specs & values
- Fan belt deflection 10 to 15 mm
Full service-parts list: MQ Power DCA-220SSV →, MQ Power DCA-220SSVU →
Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.