Home›Repair guides›MQ Power›Adding Coolant

MQ Power DCA-220SSV / DCA-220SSVU — Adding Coolant

Maintenance · Radiator / recovery tank

For the MQ Power DCA-220SSV / DCA-220SSVU, from the MQ Power operator's manual.

Applies to: MQ Power DCA-220SSV, MQ Power DCA-220SSVU, Volvo Penta TAD520GE engine, Volvo Penta TAD741GE engine

Before you start

  • Removing the radiator cap while the engine is hot will cause boiling water to gush out, causing severe scalding.

Procedure

  1. Add coolant day-to-day from the recovery tank.
  2. Do not remove the radiator cap until the unit has completely cooled.
  3. Keep coolant level in recovery tank between H and L markings.

Specs & values

  • Antifreeze mixing ratio must be less than 50%

Full service-parts list: MQ Power DCA-220SSV →, MQ Power DCA-220SSVU →

Source: MQ Power operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MQ Power repair guides →