Mitsubishi S4S-D — Installation of Timing Gear Case
Installation
For the Mitsubishi S4S-D, from the Mitsubishi service manual.
Applies to: Mitsubishi S4S-D, Mitsubishi S4S engine
Procedure
- Install the gasket to fit the crankcase dowel pin.
- Apply engine oil to the oil seal lip.
- Install the timing gear case and tighten the bolts.
Specs & values
- Timing gear case bolts: 17.0 to 20.0 N.m (1.7 to 2.0 kgf.m) [12.3 to 14.5 lbf.ft]
Source: Mitsubishi service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.