Magnum — Starting the Unit
Operation · Engine
From a Magnum operator's manual covering: L3E-W461ML, MLT4060, MLT4080, MLT4080M. Check it applies to your exact model before use.
Applies to: Magnum MLT4080, Mitsubishi L3E-W461ML engine, Kubota D1005-E3BG1-MGM-1 engine, Kubota D1105-E3BG engine
Before you start
- Excessive cranking will cause damage to starter
- If oil pressure not obtained within 15 seconds, low oil automatic shutdown will stop engine
Procedure
- Check main circuit breaker and individual light breakers are OFF
- Turn key to GLOW PLUG position and hold 5 seconds or until glow plug indicator turns red (Kubota has no glow plug indicator)
- Turn key to START position and hold until engine cranks and starts, release key to RUN position
- Do not crank engine longer than 10 seconds at a time; wait 30 seconds between attempts
- Allow engine to reach normal operating temperature before switching on loads
Full service-parts list: Magnum MLT4080 →, Kubota D1005-E3BG1-MGM-1 engine →, Kubota D1105-E3BG engine →
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.