Magnum MTP4000S — Lifting The Pump
Operation
For the Magnum MTP4000S, from the Magnum operator's manual.
Applies to: John Deere PE4024TF281 engine
Before you start
- Make sure the equipment being used to lift the unit is in good condition and has sufficient capacity
- Always remain aware of the position of other people and objects around you as you move the unit
Procedure
- Remove suction and discharge piping from the pump prior to moving.
- Attach any slings, chains, or hooks directly to the central lift eye.
- Use the forklift pockets with care; approach the unit as perpendicular as possible.
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.